|
|
The bearings are wrapped of a cold formable homogenous
bronze (CuSn8), which will obtain exceptional material
properties. The standard size are fitted with diamond shaped
lubrication indents on the bearing surface. These indents
serve as lubricant reservoirs to rapidly build up a
lubrication film in the start movement and therewith reduce
the start friction. The material suitable for constructions,
agriculture etc where high load and slow movement are
occurring.
|
1. Easy of fitting
and lubrication
2. High load capacity
3. Possibility of producing items, inner side can be machined
4. High level thermal conductivity
5. Minimum overall dimensions
6. Chemical resistance
Initial pre-lubrication at assembly required... |
This type of bushing
is widely applied in hoisting machines and other construction
machines, automobiles, tractors, trucks, machines tools and some
mineral engines. It can be fabricated into bushes, half
bearings, flanged bushes, trust washers, spherical bearing so
on. |
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese