|
|
The same produce process and application as FB090 type material
except overlay the solid lubricants into the diamond shaped
lubrication indents on the bearing surface, which will offer
good friction at the start and process works and keep good
condition even no oil giving at short time. So can be used
in construction machines, gears, automotive clutch parts etc.
|
1. Easy of fitting
and lubrication
2. High load capacity
3. Excellent wear resistance with lower friction
4. High level thermal conductivity
5. Minimum overall dimensions
6. Chemical resistance
7. Can be worked under dry/marginal lubrication at short time,
have much lower friction factor at initial moving
Initial pre-lubrication at assembly required... |
This type of bushing
is widely applied in hoisting machines and other construction
machines, automobiles, tractors, trucks, machines tools and
some mineral engines. |
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese