|
|
The base material for sintered parts such as sliding bearings
or other formed parts are iron, bronze, iron with bronze and
other metal in powder form. This powder is formed under high
pressure in dies into a temperature which is just below the
melting point. According to the work condition, the bearings
can impregnated different oil or solid lubricants for the
self-lubricating.
Sintered self-lubricating bearings are the ideal and economical
solution for applications where lubrication is difficult or
can not be given.
|
1. Good wear resistance
with lower friction
2. Lower maintenance requirement
3. Lower the material cost for large production
4. High speed with lower noise
5. Can be machined again after installation if possible
6. Can produced different structure as special request |
INside Diameter ID:F7
Outside Diameter OD:r7
Flange Diameter:js13
Flange Thickness:js13 |
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese