|
|
FT090 derive from FB090 bearings, but with the difference
that the indentations on the sliding surface are replaced
by through-holes which have a greater capacity to collect
the lubricant compared with the indentations. These indents
serve as lubricant reservoirs to rapidly build up a lubrication
film in the start movement and therewith reduce the start
friction. The material suitable for constructions, agriculture
etc where high load and slow movement are occurring.
The bearing surface of the FT090 should be reduced by 15%
in consideration of the through-holes
|
1. Easy of fitting
and lubrication
2. High load capacity
3. Excellent wear resistance with lower friction
4. High level thermal conductivity
5. Minimum overall dimensions
6. Chemical resistance
7. Extended service life and lubrication intervals than normal
FB090 type bearings
8. Free choice of lubricant
9. Collection of dust and rub off particles in the holes
Initial pre-lubrication at assembly required... |
This type of bushing
is widely applied in hoisting machines and other construction
machines, automobiles, tractors, trucks, machines tools and
some mineral engines. It can be fabricated into bushes, half
bearings, flanged bushes, trust washers, spherical bearing so
on. |
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese